Endress+Hauser WirelessHART Fieldgate SWG70 - Self Test

WirelessHART Fieldgate SWG70 Additional Functions
Endress + Hauser 103
11.2 Self Test
Self test invokes a self testing procedure for Fieldgate SWG70.
1. Click Additional Functions> Self Test to open the dialog:
2. For this, click the Perform Self-Test button in the dialog.
– Call this function in FieldCare by right-clicking Fieldgate SWG70 and then selecting
the Self Test option in the context menu.
3. The results can be seen in the first two sections of the HART diagnosis dialog:
Diagnostics =>Wired Communication =>HART dialog. See Chapter 9.3.2 "HART" on
page 62.