WirelessHART Fieldgate SWG70 Engineering
Endress + Hauser 67
10.2 Topology View (Engineering)
Topology view is a graphical overview of all wireless devices within your network, including
their connection status and connection paths. The view set up in the dialog described here is
shown in Diagnosis => Wireless Communication => Topology View, see Section 9.2.4.
1. Click on Engineering 0> Topology View, to open the dialog:
– The dialog opens with icons and long tags for Fieldgate SWG70 and all WirelessHART
devices connected to the network positioned in a blank workspace.
Topology View parameters
Parameter Meaning
Select Map Uploads a map in .jpg format
Reset Zoom Resets the zoom to the minimum value
Import Uploads the current devices and positions from a CSV file
Export Stores the current devices and positions in a CSV file
Refresh Updates the information on signal quality and traffic
Zoom rider – ------------ + Increases (+) or decreases (–) the magnification of the topology view
Horizontal image origin Indicates the position of the horizontal origin of the image
Vertical image origin Indicates the position of the vertical origin of the image
Resolution Sets the resolution of the image
Paths shown Selects the paths to be shown in the topology view
– All: all paths are shown
– In use: only those paths used by the network are shown
– Selected: the paths associated with a device are shown when the cursor is moved
to the said device
– None: No paths are shown
To Next Page
Loading...
