WirelessHART Fieldgate SWG70 Diagnostics
Endress + Hauser 59
9.2.4 Topology View (Diagnostics)
Topology view is a graphical overview of all wireless devices within your network, including
their connection status and connection paths. It is set up in Engineering => Topology View.
See Chapter 10.2 "Topology View (Engineering)" on page 67.
1. Click on Diagnostics => Wireless Communication => Topology View to open the
dialog:
– The lines between the devices represent the connection paths.
– The color and thickness indicate the connection quality respectively traffic for each
connection path.
– The significance of the colors, line thicknesses and other functions are to be found in
the table which follows.
2. In the example above:
– The most traffic flows between the Adapter WAD_301 and Fieldgate SWG70_01.
– Less traffic flows between Adapter WAD_302 and WAD_303 respectively and
Fieldgate SWG70_01 as well as between Adapter WAD_302 and WAD 303
respectively and Adapter WAD_301.
– There is no traffic between Adapter WAD_302 and Adapter WAD_303, but the path
is managed as a backup path in the event of one of the other paths failing.
– The stability of all connections is good.
3. Right-click on an adapter to display its network statistics.
To Next Page
Loading...
