Endress+Hauser WirelessHART Fieldgate SWG70 - Set Device Addresses (DTM)

Additional Functions WirelessHART Fieldgate SWG70
106 Endress + Hauser
11.6 Set Device Addresses (DTM)
Set Device Addresses displays all adapters, together with their wired connections, that can
be seen in the network. The device address is the device long tag stored in the device. Call
this function in FieldCare by right-clicking Fieldgate SWG70 and then selecting the More
Functions => Set Device Addresses options in the context menu.
Set DTM Addresses allows the user to match the address of a physical device, e.g. the Long
Tag in WirelessHART networks, to the address saved in the DTM. The function is not rele-
vant to FieldCare but might be required for other FDT frames.
1. Click Additional Functions> Set Device Addresses to open the dialog:
To change the
device address:
2. Place the cursor inside a cell of the Device Long Tag column.
3. Change the device long tag as required. You may change the long tags of several devices
at once, if needed.
4. To apply the new DTM address(es) press Update Changed Tags.
– The new DTM addresses are stored to the devices.
– Refresh updates the list.