Endress+Hauser WirelessHART Fieldgate SWG70 - Creating and Editing an Instrument List

WirelessHART Fieldgate SWG70 Engineering
Endress + Hauser 65
10.1.2 Creating and editing an Instrument List
Normally the Instrument List is only generated once the Refresh button is pressed after the
network is up and running. It is possible, however, to create a list from scratch before any
WirelessHART devices join the network. This allows the order in which the devices are dis-
played in the both the Instrument List and Operating Modes - and hence in the Modbus
mapping - to be predetermined. The individual entries can also be edited.
NOTICE!
• When editing the instrument list, incomplete entries are highlighted in red. These data
must be entered or corrected before the instrument list can be downloaded to Fieldgate
SWG70.
• Entries marked with yellow already exist: the copies must be removed.
Procedure for Web Server 1. Click on Engineering => Instrument List to display the instrument list.
2. To add a device, click into the last row of the instrument list and enter the Long Tag of
the device.
3. Enter the following optional additional parameters by clicking on the appropriate field:
– I/O Card to which the device should be attached.
– Channel: adapters are assigned to Channel 0, devices to Channel 1.
– Device ID: unique HART serial number assigned on manufacture of the device.
– Extended Device Type Code: unique code identifying the HART family type. press
Enter to confirm your entries.
NOTICE!
• If the values of the fields "Device ID" and "Extended Device Type Code" are unknown, "0" must
be entered.
4. When the instrument list is complete, press Apply to download it to Fieldgate SWG70.
5. When the devices join the network at a later time, they will be assigned to their allotted
positions in the Operating Modes list.
6. When all devices have joined the network, return to the Instrument List and press
Refresh to import the latest list.
7. Press Export to store a copy of the list on your computer as a CSV file.
– The file can be re-imported into the Instrument List by pressing Import and
navigating to the folder containing the file.