Endress+Hauser WirelessHART Fieldgate SWG70 - 8 Fieldgate Configuration; Identification

Fieldgate configuration WirelessHART Fieldgate SWG70
44 Endress + Hauser
8 Fieldgate configuration
Parameter contains all parameters related to the set-up of Fieldgate SWG70. In the case of
FieldCare, right-click Fieldgate SWG70 and select Online Parameterize.
8.1 Identification
The parameters to be found in this leaf pertain to the identification of Fieldgate SWG70. The
default parameters of Fieldgate SWG70 will appear in the appropriate input fields.
1. Click Parameters => Identification to display the associated parameters:
2. Enter at least a Device Long Tag and a Device Tag, pressing Enter to register the
change.
Identification parameters
Parameter Meaning Default
Device Long Tag Identifies Fieldgate within the plant network
– Max. 32 character ASCII "Latin 1" string
–
Device Tag Identifies Fieldgate within the plant network
– Max. 8 character HART Packed ASCII string*
–
Descriptor User text describing, e.g. function or location of Fieldgate SWG70
– Max. 16 character HART Packed ASCII string*
–
Date Date in dd.mm.yyyy format; you can enter any date here, e.g. the date of
the last configuration
01.04.2009
Message User message, to be transmitted with information from the adapter
– Max. 32 character HART Packed ASCII string*
–
Serial number Indicates serial number of connected Fieldgate SWG70 –
Ext. Order Code Indicates order code of connected Fieldgate SWG70 –
Order Code Indicate order identification of the connected Fieldgate SWG70 –
Country Code Country in which the Fieldgate is to be used - select from list
– Governs the signal strength that can be set for the device
Germany
* Valid character set: @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
[ \ ] ^ _ blank ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ?