WirelessHART Fieldgate SWG70 Commissioning
Endress + Hauser 43
The Web interface differs from the DTM only in the presentation of the parameters. In the
case of the Web interface, the parameters are presented in a single tree. In the case of the
DTM, configuration, diagnostics and other functions are presented in separate DTM dialog
boxes. To open the dialog boxes, you must right-click the Fieldgate SWG70 and select the
desired option from the context menu. The DTM offers addition functions which are FDT-
frame specific, e.g. Set Device Addresses. In both cases parameters are registered by pressing
Enter. In some cases, in which more than one parameter is registered, an additional button
must be pressed for the changes to take effect.
Reset Chapter 11.1 X X X
Self Test Chapter 11.2 X X X
Firmware Upgrade (Web Server) Chapter 11.3 X X X
Change Password (Web Server) Chapter 11.4 X X X
Set DTM Addresses (DTM) Chapter 11.5 X X X
Set Device Addresses (DTM) Chapter 11.6 X X X
Upload Certificate (Web server) Chapter 11.7 X X X
Measurement Chapter 12 X X X
To Next Page
Loading...
