Engineering WirelessHART Fieldgate SWG70
68 Endress + Hauser
Topology View set-up The WirelessHART devices are automatically added to the topology view. If required, click
Refresh to reload the device information. Note that reloading the device information takes
some time.
1. Click Select Map, to select a background image for the topology view.
– For example, a satellite photo, a floor plan or a diagram.
– The image must be in .jpg format.
2. In the dialog that now appears, click Browse to navigate to the background image.
3. Click Upload Map to upload the background image.
4. If required, edit the coordinates of the image origin in the Horizontal Image Origin
and Vertical Image Origin boxes.
5. Enter a value in the Resolution box to scale the background image, for example
0.4 m/pixel.
6. Arrange the WirelessHART devices in the topology view by dragging and dropping the
icons to a selected position.
– For more accurate positioning use the slider to zoom in or out of the topology view.
– Click Reset Zoom to reset the zoom so that all parts become visible.
To Next Page
Loading...
