Engineering WirelessHART Fieldgate SWG70
82 Endress + Hauser
"Add" – add objects manually to the device tree
1. Start the program either via the Windows Start icon or via the program icon on the
desktop. The following window appears:
2. Configure the Fieldgate SWG70. See Chapter 10.4.3 "Description of the WirelessHART
Fieldgate OPC Configurator" on page 83.
3. In the left pane, click on the Fieldgate.
4. Right click on the Fieldgate to open the context menu.
5. Using the Add menu, add other objects such as a Folder, Adapter or Subdevice (field
device). The device tree in the left pane is extended as appropriate.
– Folder: the object "Folder" can be used to structure the device tree. "Folder" may contain
several adapters and field devices (subdevices).
– Adapters: adapters such as a WirelessHART Adapter SWA70 or a field device with
antenna. You can add several field devices below an adapter.
– Subdevices: field devices without an antenna. You cannot add other objects below a
field device (subdevice).
6. Configure all the adapters and field devices (subdevices) as described in Chapter 10.4.3.
In order to enable parameterization, select the adapter or field device concerned in the
left pane.
7. Use the File menu to store the configuration file.
– File > Save Active: the configuration file is stored under the name
GatewayConfiguration.xml in the folder that is accessed by the WirelessHART OPC
server.
– File > Save As: You can select your own file name and storage location for the
configuration file.
To Next Page
Loading...
