WirelessHART Fieldgate SWG70 Engineering
Endress + Hauser 89
Device Variable Codes
Device Variable Codes for
WirelessHART Adapter
SWA70
For additional information, see the Operating Instructions for the WirelessHART Adapter
SWA70, Chapter "Device Variable Mapping".
Device Variable Codes for
field devices (subdevices)
If you configure a burst for a field device (subdevice), use the Device Variable Codes to be
found in the corresponding manual.
Device Variable codes Meaning
0 Battery temperature
1 Minimal battery temperature
2 Maximal battery temperature
3 Battery voltage
4 Consumed energy
5 RSL to best neighbor
6 RSL to second best neighbor
7 Battery voltage with load
8 Battery voltage without load
9 Normalized consumed energy
243 Estimated lifetime of battery
244 Percent range of loop current
245 Loop current
246 Primary variable
247 Secondary variable
248 Tertiary variable
249 Quaternary variable
To Next Page
Loading...
