EnGenius DuraFon - Handset Features; Contact and System Settings; Feature Configuration

~18~
the scrolling key.
e.
Phone Book transfer via air
i. Transfer a specific Phone Book to one handset or all registered
handsets
ii. Transfer all Phone Books to one handset or all registered handsets
15.
Key Tone
a.
Four-level Key Tone volume selections (Off/Low/Medium/High).
b.
Four Key Tone type selections.
16.
Call Timers
a.
Displays call time duration for current call , during and immediately after
the call.
17.
Programmable Feature Call
a.
Allows user to pre-program the most frequently used Feature codes into
the DuraFon-SIP, which is adjunct to the PBX system.
b.
Up to 10-entries can be saved.
c.
Once the feature code has been programmed, you can quickly perform
those functions during the call by pressing the OPTION soft key.
18.
Menu Display
a.
To avoid mis-setup in the “Call Settings”(MENU-4), “Phone Settings”
(MENU-5), and “Base Settings” (MENU-6), these settings can be hidden.
b.
The Handset password is required before entering Menu Display (MENU-
8), the default handset password is “0000.”
c.
When disabling the settings, they will no longer be displayed unless
enabled by entering Menu Display again.
19.
PA On/Off
a.
Enable or disable the Broadcast function.
b.
When PA is Off, the handset cannot receive Broadcast from the base
station or other registered handsets; but it can broadcast to other
registered handsets.
20.
Group Setting
a.
Allows the handset to subscribe to one or several groups.
Re: Up to 7 groups (1~7) can be subscribed.
21.
Custom Name
a.
Change the “DuraFon-SIP” screen to the desired wording or info, such as