11b/g Wireless Long Range Multi-function 7+1 AP Version 1.1
13
3 Switching Between Operating Modes
This device can operate in the following modes:
a) Access Point / WDS AP
b) Client Bridge
c) WDS Bridge
d) Repeater
e) AP Router
f) Client Router
This chapter will describe how to switch between operating modes.
3.1 Logging In
To configure the device through the web-browser, enter the IP address of the device
(default: 192.168.1.1) into the address bar of the web-browser and press Enter.
Make sure that the device and your computers are configured on the same subnet.
Refer to Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web-browser will display the login page.
Specify admin for both the user name and password.
After logging in, you will see the graphical user interface of the device. Click on the
System Properties link under the System navigation drop-down menu.
Select and operating mode from the drop-down list and then click on the Apply
button.
To Next Page
Loading...
