19
GB
If the sauna bath should be nished before the
pre-set limitation, press the "On/Off
"but-
ton. The On symbol on display will disappear
and only the current time will be displayed.
The cabin light automatically switches off
30 minutes after the heating is off. You can
switch the lighting off at any time using the
"light
" button.
The buttons to be conrmed are shown and quoted in the text as follows.
Symbols shown in the display sketches, framed with the symbols
, are displayed ash-
ing on the unit.
Any change to the set parameters must be saved by pressing the "Mode" button. The respec-
tive newly set values ash briey before the unit switches back to the basic display.
If you change the parameters without saving with the "Mode" button, the previous values are
automatically restored.
If you do not press any button for a longer period during programming, the display automati-
cally returns to the basic state and the background illumination goes out after a brief period.
To consider when programming:
20:03
“On / Off”
“Light”
“Down” ”Up”"Mode"
To Next Page
