4
GB
Package contents
(subject to change)
Included with the control unit are:
1. An heater-sensor board with overheat shutoff protection, KTY-sensors with sensor housing
, two 3x25 mm fastening screws and a 2,0 m long sensor cable, red and white.
2. A plastic bag with three 4 x 20 mm fastening screws.
3. A replacement overheat protection module.
Optional connections:
Bench sensor Art. No: 94.4389
Colored light module Art. No: 94.2761
Neon colored light module Art. No: 94.4286
EmoLux colored light module Art. No: 94.4834
Remote start button Art.No: 94.4645
Connection line 10m Art.No: 94.4646
Connection line 25m Art.No: 94.4647
Connection line 50m Art.No: 94.4648
GSM mobile phone remote switch modul Art.No: 94.4671
Phase angle control
module for LED-/Halogen spotlights Art.No: 94.4970
Control module for energie-saving
(uorescent) lamps Art.No: 94.4669
To Next Page
Loading...
Need help?
General
