20
GB
The various programming options for the unit are generally differentiated into:
Operator level These setting levels described with "F 1 - F 10". Depending on
the unit type it may be the case that certain levels are not shown.
Here you can change the parameters which need to be adapted
very rarely in daily use. They are set during the initial setup and
then usually remain unchanged for a long period of time.
Programming level The levels are shown with "P 0 - P 9". Depending on the unit type
or operating mode, it may be the case that certain levels are not
shown.
Here you can change the parameters which need to be frequently
adapted to your individual requirements in daily use.
SAFE
The keylock / hotel mode
By activating the keylock / hotel mode, the sauna can
only be switched on and off by the user. Changes to
the individual parameters are not possible.
To activate the keylock / hotel mode, press the "Mode",
"
" and " " buttons at the same time until the
display shows "SAFE" .
The display returns to the original status when the
buttons are released.
If other buttons are pressed than the
button, the
display shows "SAFE".
To deactivate the keylock / hotel mode, press the
"Mode", "
" and " " buttons at the same time
longer than 3 seconds.
20:03
To Next Page
