EOS EMOTEC DC 9000 - F8 the Optional Bench Sensor

23
GB
F8 The 2nd temperature sensor (bench sensor, optional)
F 1
F 8
0
1
1
To activate or deactivate the bench sensor
(for instance, after an upgrade or an error)
please press „Mode“ and „ “ button syn-
chron.
(The display shows „F1“ and the clock sym-
bol.) Afterwards press „
„ button until „F8“
appears in the display.
Please conrm with the „Mode“ button.
Please choose the desired value
with the „ “ and „ “ buttons.
1: bench sensor activated
0: bench sensor deactivated
Please conrm with a long press on the
„Mode“ button until the new value is ashing
on the display.
Afterwards the displays shows „F8“ for short
time. The new value is now stored.