5
GB
Technical data
Nominal voltage: 400 V 3 N AC 50 Hz
Switching load: max. 9 kW Ohm resistive load (AC1 - mode)
device can be extended by connecting powered control units
up to 36 kW
Heating time limit: 6 hr, 12 hr or no heating time limit
Display: Jumbo backlit LCD
Protection class: IPx4 in line with EN 60529 splashed water resistant
Normal range for sauna: 30 to 110°C
Sensor system: KTY sensor with safety temperature limiter 142°C
Control characteristic: digital two-point regulation
Fan output: min. 25 W max.100 W (only fan excluding capacitor)
Light: min. 25 W max.100 W Only ohm resistive load, we recommend
to use special bulbs like baking oven bulbs. Other lamps have to
use with the optional control modules.).
Coloured light (optional): max. 100 W per colour
Colour on-time: 1 - 10 min
Colour order: red - red/yellow - yellow - yellow/green - green - green/blue - blue
- blue/red
Error display: via warning triangle (ashing) and error code on LCD
Ambient temperatures: -10°C to +35°C
Storage temperatures: -20°C to +60°C
Fuse protection on the light and the ventilation can
be a maximum of 1A delay action. There is a danger
of re if greater fuse protection is used!
To Next Page
Loading...
