Installation
Centrifuge 5702/5702 R/5702 RH
English (EN)
20
4.2 Preparing installation
Unpacking the centrifuge
1. Open the transport packing.
2. Centrifuge 5702: Remove the covering cardboard.
3. Take the accessories out of the packing.
4. Use the transport straps to lift the centrifuge out of the packing.
5. Place the device on a suitable work surface.
6. Remove the transport straps from the centrifuge.
7. There is a transport securing device attached to the front and the rear panel of the centrifuge. Remove
the transport securing devices.
8. Remove the plastic sleeve.
9. Centrifuge 5702: The transport securing device for the motor is located underneath the centrifuge. Lift
the centrifuge on one side and remove the transport securing device.
10.Centrifuge 5702 R, Centrifuge 5702 RH: Insert the condensation water tray.
CAUTION! Risk of injury when lifting and carrying heavy loads
The device is heavy. Lifting and carrying the device can lead to back injuries.
Only lift and transport the device with a sufficient number of helpers.
Use a transport aid for transporting the device.
The device may only be stored and transported in its original packing.
Retain the original packing, transport straps, packing material and transport securing
devices.
Do not cut up the transport straps.
To Next Page
Loading...
