49
Maintenance
Centrifuge 5702/5702 R/5702 RH
English (EN)
8.6 Replacing the fuses
The holder is located below the mains/power connection.
1. Switch off the device and isolate it from the mains/power supply.
2. Pull the fuse holder out of the device.
3. Replace the fuses.
8.7 Decontamination before shipment
If you are shipping the device to the authorized Technical Service for repairs or to your authorized dealer
for disposal please note the following:
WARNING! Risk to health from contaminated device
1. Follow the instructions in the decontamination certificate. You can find it as a PDF file on
our website (www.eppendorf.com/decontamination
).
2. Decontaminate all the parts you would like to dispatch.
3. Include the fully completed decontamination certificate in the packing.
To Next Page
Loading...