Eppendorf 5702 - 13.2.2 Rotor A-4-38 with rectangular buckets; 13.3 Rotor A-8-17

Ordering information
Centrifuge 5702/5702 R/5702 RH
English (EN)
74
* Cannot be used with aerosol-tight caps.
13.2.2 Rotor A-4-38 with rectangular buckets
13.3 Rotor A-8-17
Rubber mat
for adapter 5702 737.003, 5702 719.005
5702 741.000 022666941 7 mL, 20 pieces
Rubber mat
for adapter 5702 735.000
5702 742.007 022666967 10 mL, 20 pieces
Rubber mat
for adapter 5702 724.009
5702 749.007 022639480 15 mL, 20 pieces
Order no.
(International)
Order no. (North
America)
Description
Rotor A-4-38
8 positions, max. Ø 38 mm
5702 740.004 022639064 without buckets
Rectangular bucket 90 mL
for rotor A-4-38
5702 762.008 022639315 2 pieces
5702 709.000 022639307 4 pieces
Adapter for 90 mL rectangular bucket
for use with standard tubes, (number × tube volume, Ø adapter
bore × max. tube length)
5702 710.008 022639323 10 × 5 – 7 mL, 13 mm × 100 mm, set of 2
5702 711.004 022639340 8 × 9 mL, 14.5 mm × 100 mm, set of 2
5702 712.000 022639366 6 × 15 mL, 17.5 mm × 100 mm, set of 2
5702 713.007 022639382 4 × 20 mL, 22 mm × 100 mm, set of 2
5702 716.006 022639391 2 × 25 mL, 25 mm × 100 mm, set of 2
5702 763.004 5702763004 9 × XX mL, 12 mm × 100 mm, set of 2
Order no.
(International)
Order no. (North
America)
Description
Rotor A-8-17
8 positions, max. Ø 17 mm
5702 700.002 022639501 for 15 mL vessels
Adapter
for rotor A-8-17
5702 702.005 022639528 for conical tubes 15 mL, 8 pieces
Rubber mat
for rotor A-8-17
5702 701.009 022639510 15 mL round-bottom tubes, 8 pieces
Order no.
(International)
Order no. (North
America)
Description