Eppendorf 5702 - Page 66

Rotors, tubes and adapters
Centrifuge 5702/5702 R/5702 RH
English (EN)
66
Micro test tube flat 2 850 × g
2 mL – 7 mL Ø 12.5 mm 4 400 rpm
5/20 5702 737.003
5702 741.000
100 mm/100 mm 13.2 cm
Micro test tube flat 2 850 × g
2.6 mL – 7 mL Ø 13.5 mm 4 400 rpm
4/16 5702 719.005
5702 741.000
100 mm/100 mm 13.2 cm
Micro test tube flat 2 850 × g
4 mL – 10 mL Ø 16 mm 4 400 rpm
4/16 5702 735.000
5702 742.007
100 mm/100 mm 13.2 cm
Micro test tube flat 2 943 × g
5 mL Ø 17 mm 4 400 rpm
1/4 5702 733.008 60 mm/60 mm 13.6 cm
Micro test tube round 2 800 × g
9 mL – 15 mL Ø 17.5 mm 4 400 rpm
4/16 5702 724.009
5702 749.007
100 mm/100 mm 13.0 cm
Micro test tube conical 3 000 × g
15 mL Ø 17.2 mm 4 400 rpm
1/4 5702 732.001 120 mm/121 mm 13.7 cm
Tube Tube Adapter Bottom shape Max. g-force
Capacity Tube diameter Max. speed
Number per
adapter/rotor
Order no.
(international)
Max. tube length
with/without
aerosol-tight cap
Radius