EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Troubleshooting 88
At operation Paper is not ejected completely
and causes a jam near the Paper
eject frame.
ASF unit 1. Check that the paper is fed along the right Edge guide. 1. Feed the paper along the right Edge guide.
Paper eject unit 1. Check the Paper eject unit for deformation or damage. 1. Change the Paper eject unit for a new one.
Spur Gear 43
(Paper eject
roller A)
1. Check the Spur gear 43 for damage. 1. Change the Spur gear 43 for a new one.
Spur gear 62
(Paper eject
roller B)
1. Check the Spur gear 62 for damage. 1. Change the Spur gear 62 for a new one.
Table 3-6. Phenomenon-Based Paper Jam Error Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
Spur gear 43
Spur gear 62
To Next Page
Loading...
