118
Setting Up Your Printer on a Network
❏ Set the security for the shared printer (access right for clients).
Clients can not use the shared printer without right. For details,
see Windows help.
You need to set the client computers so that they can use the
printer on a Network. See the following pages for details:
❏ “With Windows Me/98/95” on page 119
❏ “With Windows XP/2000” on page 120
❏ “With Windows NT 4.0” on page 124
Setting for the Clients
This section describes how to install the printer driver by
accessing the shared printer on a network.
Note:
❏ TosharetheprinteronaWindowsnetwork,youneedtosetthe
printer server. For details, see “Setting Up Your Printer as a Shared
Printer”onpage 110(WindowsMe/98/95)or “UsinganAdditional
Driver” on page 112 (Windows XP/2000/NT 4.0).
❏ This section describes how to access the shared printer on a standard
network system using the server (Microsoft workgroup). When you
cannot access the shared printer due to the network system, ask the
administrator of the network.
❏ This section describes how to install the printer driver by accessing
the shared printer from the Printers folder. You can also access the
shared printer from Network Neighborhood or My Network on the
Windows desktop.
❏ When you want to use EPSON Status Monitor 3 at clients, you
haveto install both ofthe printer driver andEPSON Status Monitor
3 in each client from the CD-ROM.
To Next Page
Loading...
Need help?
General