Epson AcuLaser C4000 - Printing Font Samples; Adding more Fonts

Working with Fonts
355
C
C
C
C
C
C
C
C
C
C
C
C
Note:
Depending on the print density, or on the quality or color of the paper,
OCR B font may not be readable. Print a sample and make sure the font
can be read before printing large quantities.
Printing font samples
Youcan print samples of thefonts available in each modeby using
the control panel’s Information Menu. Follow these steps to print
font samples.
1. Make sure that paper is loaded.
2. Make sure the LCD panel displays
Ready
or
Standby
,then
press the
Enter button.
3. Press the
Down button to select the font sample for the
appropriate mode.
4. Press the
Enter button to print the selected font sample
sheet.
Adding More Fonts
You can add a wide variety of fonts to your computer. Most font
packages include an installer for this purpose.
EPSON Orator -
EPSON Script -
EPSON Presentor -
EPSON Sans serif -
OCR B -