42
Paper Handling
When using thick paper, you should make paper settings as
shown below:
❏ Make settings on the Basic Settings menu (for Windows) or
the Basic Settings dialog box (for Macintosh) in the printer
driver as shown below:
❏ You can also make these settings on the Tray Menu and the
Setup Menu in the control panel.
Note:
When using thick paper, you cannot do duplex printing automatically.
When you want to make duplex printing with thick paper, set the
Page
side
setting on the control panel’s Setup Menu to
Back
or
Front
,then
print manually.
Extra thick paper
Extra thick paper can be loaded into the MP tray only (up to a 10
mm thick stack). When using extra thick paper, you should make
paper settings as shown below:
Paper Size: (Select appropriate size)
Paper Source: MP tray
Paper Type: Thick
MP Tray Size (on the Tray Menu): (Select appropriate size)
PaperType(ontheSetupMenu):
Thick
To Next Page
Loading...
