EasyManua.ls Logo

Epson AcuLaser C4000 - Installing the Printer Driver from the CD-ROM

Epson AcuLaser C4000
406 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
126
Setting Up Your Printer on a Network
When the additional driver for Windows NT 4.0 is not installed
in the Windows XP/2000 printer server or the printer servers
OS is Windows Me/98/95, go to Installing the Printer Driver
from the CD-ROM on page 126.
5. Select whether to use the printer as the default printer or not,
then click OK.
6. Click Finish.
Installing the Printer Driver from the CD-ROM
This section describes how to install the printer driver in the
clients when setting the network system as follows:
The additional drivers are not installed in the Windows
XP/2000/NT 4.0 printer server.
The printer servers OS is the Windows Me/98/95 and the
clients OS is the Windows XP/2000/NT 4.0.
The on-screen displays on the following pages may differ
depending on the version of Windows OS.
Note:
When installing in Windows XP/2000/NT 4.0 clients, you must
access Windows XP/2000/NT 4.0 with the Administrator.
When the additional drivers are installed or the computers of the
server and clients use the same OS, you do not have to install the
printer drivers from the CD-ROM.
1. Access the shared printer and a prompt may appear. Click
OK, and then follow the on-screen instructions to install the
printer driver from the CD-ROM.

Table of Contents

Other manuals for Epson AcuLaser C4000

Related product manuals