Epson AcuLaser C4000 - Setting for the USB Connection

Using the Printer Software with Macintosh
159
5
5
5
5
5
5
5
5
5
5
5
5
Setting for the USB connection
Note:
IfyouareconnectingtheUSBcabletoyourMacintoshthroughaUSB
hub,besureto connect using the first hub in the chain. The USBinterface
may be unstable depending on the hub used. If you experience problems
withthistypeof setup, connect theUSBcabledirectlytoyourcomputer’s
USB connector.
1. Select
Chooser
from the Apple menu. Click the
AL-C4000
icon and then click the USB port your printer is connected to.
2. Select
Background Printing
to turn background printing on or
off.
Note:
❏
Background printing must be turned on for EPSON Status
Monitor 3 to manage print jobs.
❏
When background printing is on, you can use your Macintosh
while it is preparing a document for printing.
3. Close the Chooser.
1
2