284
Troubleshooting
w
Warning:
❏ Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
maybeveryhot.
❏ Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.
Jam AB (covers A and B)
Whenthere is paper jammed around the fuser unit, the LCD panel
displays the
Jam AB
error message.
Follow these steps to clear the jammed paper.
1. Press the latch on cover A and open the cover.
To Next Page
Loading...
