2
❏ Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
maybeveryhot.
❏ Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.
❏ Avoid touching the components inside the printer unless
instructed to do so in this guide.
❏ Neverforcetheprinter’s components into place.Althoughthe
printer is designed to be sturdy, rough handling can damage
it.
❏ When handling toner cartridges or photoconductor units,
always place them on a clean, smooth surface.
❏ Do not attempt to modify or take toner cartridges apart. They
cannot be refilled.
❏ Do not touch the toner and avoid getting toner in your eyes.
12
To Next Page
Loading...
Need help?
General