168
Functions of the Control Panel
How to use the menus
1. Make sure the Ready light is on, then press any of the buttons
indicated above to access the menus.
2. Use the Up and
Down buttons to scroll through the
menus.
3. Press the Enter button to view the items in a menu.
Depending on the menu, the LCD panel displays an item and
the current setting separated by an asterisk (
YYYY*ZZZZ
), or
only an item (
YYYY
).
4. Use the Up and Down buttons to scroll through the
items, or press the Back button to return to the previous
level.
5. Press the Enter button to carry out the operation
indicated by an item, such as printing a status sheet or
resetting the printer; or to view the settings available for an
item, such as paper sizes or emulation modes.
Use the Up and
Down buttons to scroll through
available settings, and press the Enter button to select a
setting and return to the previous level. Press the Back
button to return to the previous level without changing the
setting.
Note:
Youneedtoturntheprinteroff and then on to activatesomesettings.
For details, see “Control Panel Menus” on page 171.
6. Press the
N
Start/Stop
button
to exit the control panel menus.
To Next Page
Loading...
