Epson AcuLaser C4000 - Page 185

Functions of the Control Panel
173
6
6
6
6
6
6
6
6
6
6
6
6
*1 This item appears only when the jobs are stored by using the Quick Print Job feature.
*2 This item appears only when Form Overlay data exists.
*3 This item appears only when the Network I/F setting in the Emulation Menu is
on
.
*4 These items appear only when the corresponding options are installed.
*5 This Item appears only when there is print job data stored in the printer’sHardDisk
Drive to be printed by using the Quick Print Job Menu.
*6 This Item appears only when there is print job data stored in the printer’sHardDisk
Drive to be printed by using the Confidential Job Menu.
*7 Available only when Network Config is set to
Yes
.
*8 When Get IPAddress is set to
Auto
, all items between and including IP Byte1 and
GW Byte4 are not available. Their default values will be used.
*9 The settings are activated after turning the printer off and then on.
*10The item appears when the appropriate font setting is selected.
AUX Menu*
4
*
9
AUX I/F, AUX Config, Get IPAddress, IP Byte1, IP
Byte2, IP Byte3, IP Byte4, SM Byte1, SM Byte2, SM
Byte3, SM Byte4, GW Byte1, GW Byte2, GW Byte3,
GW Byte4, NetWare, AppleTalk, NetBEUI, AUX Init,
Buffer Size
LJ4 Menu FontSource, Font Number, Pitch*
10
,Height*
10
,
Symset, Form, Source Symset, Dest Symset, CR
Function, LF Function, Tray Assign
GL2 Menu GLMode, Scale, Origin, Pen, End, Join, Pen0 to Pen6
PS3 Menu*
4
Error Sheet, Coloration, Image Protect
ESCP2 Menu Font, Pitch, Condensed, T.Margin, Text, CGTable,
Country, Auto CR, Auto LF, Bit Image, ZeroChar
FX Menu Font, Pitch, Condensed, T.Margin, Text, CGTable,
Country, Auto CR, Auto LF, Bit Image, ZeroChar
I239X Menu Font,Pitch,Code Page,T.Margin,Text, AutoCR, Auto
LF, Alt. Graphics, Bit Image, ZeroChar, CharacterSet
Menu Items