Getting to Know Your Printer
11
1
1
1
1
1
1
1
1
1
1
1
1
For detailed information about using the control panel, see
“Control Panel Operation” on page 163.
6 Job Cancel button Press once to cancel the current print
job.
Press down for more than two seconds
to delete all jobs from the printer
memory, including jobs the printer is
currently receiving, saving to the Hard
Disk Drive, or printing.
7 Start/Stop button Switchestheprinterbetweenreadyand
offline status.
When the error light is flashing,
pressingthisbuttonclearsthe error and
switches the printer to ready status.
8 Readylight Onwhentheprinterisready,
indicating that the printer is ready to
receive and print data.
When the printer is not ready, this light
is off.
9 Error light On or flashes when an error has
occurred.
Flashing slowly when the printer is not
ready.
10 Data light On when print data is stored in the
print buffer (the section of printer
memory reserved for receiving data)
but not yet printed.
Flashing when the printer is processing
data.
Offwhennodataremainsintheprint
buffer.
To Next Page
Loading...
