314
Troubleshooting
To clear this error, select
Clear Warning
from the control panel’s
Reset Menu. For instruction about accessing the control panel
menus, see “How to access the control panel menus” on page 166.
Turn the
Image Optimum
setting off on the control panel’sPrinting
Menu if you do not want the printer to automatically lower the
print quality to continue printing.
You may need to increase the amount of printer memory to be
able to print at the desired print quality for your document. For
moreinformation on adding memory, see “Memory Modules” on
page 225.
Install Fuser
There is no fuser unit installed or the fuser unit is not installed
properly. Turn off the printer and install the fuser unit if it is not
installed.
If a fuser unit is already installed, turn off the printer, open cover
A, then open cover D. Then close cover A and open cover B.
Remove the fuser unit, then reinstall it properly. Close covers D
and B. The error clears automatically if the fuser unit is properly
installed.
If the error is not cleared, the fuser unit is out of order. Replace it
with a new fuser unit.
Install LC1
The paper tray of the standard paper cassette is not installed, or
not installed properly. Install the paper cassette correctly to clear
this error.
Install LC2
The paper trays of the optional Large Capacity Paper Unit are not
installed, or not installed properly. Install the paper trays
correctly to clear this error.
To Next Page
Loading...
