Troubleshooting
317
9
9
9
9
9
9
9
9
9
9
9
9
K Toner Cart Out
See “XXXX Toner Cart Out” on page 323.
K Toner Low
See “XXXX Toner Low” on page 324.
K Toner Out
See “XXXX Toner Out” on page 324.
Manual Feed xxx
The manual feed mode is specified for the current print job. Make
sure the paper size indicated by xxx is loaded, then press the
N
Start/Stop
button
.
For details on the manual feed mode, see “Manually feeding
paper” on page 25.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the
N
Start/Stop
button
on the control panel to resume
printing. Or press the
q
Job Cancel button to cancel the print job.
To prevent this problem from happening again, decrease the
printing resolution or add more memory to your printer as
described in “Memory Modules” on page 225.
Menus Locked
This message appears if you try to change the printer’s settings
through the control panel when the buttons are locked. You can
unlock them by using the EPSON WinAssist or WebAssist utility.
Refer to the
Administrator’sGuide
for information.
M Toner Cart Out
See “XXXX Toner Cart Out” on page 323.
To Next Page
Loading...
