364
Working with Fonts
Notes on inputting and formatting barcodes
Pleasenotethe following wheninputtingandformatting bar code
characters:
❏ Do not apply shading or special character formatting, such as
bold, italic, or underline.
❏ Print bar codes in black and white only.
❏ When rotating characters, only specify rotation angles of 90°,
180°, and 270°.
❏ Turn off all automatic character and word spacing settings in
your application.
❏ Do not use features in your application which enlarge or
reduce the size of characters in only the vertical or horizontal
direction.
❏ Turn off your application’s auto-correct features for spelling,
grammar, spacing, etc.
❏ To more easily distinguish bar codes from other text in your
document, set your application to show text symbols, such as
paragraph marks, tabs, etc.
❏ Because special characters such as Start bar and Stop bar are
added when an EPSON BarCode Font is selected, the
resulting bar code may have more characters than were
originally input.
❏ For best results, use only the font sizes recommended in
“EPSON BarCode Font specifications” on page 365 for the
EPSON BarCode Font you are using. Bar codes in other sizes
may not be readable with all bar code readers.
To Next Page
Loading...
