121
8. Select the Scan tab again, then tap the start icon to start scanning.
Your product scans your original and saves the scanned file to the external USB device.
9. After you finish working with the USB device, pull it out of the external interface USB port.
Caution: Check the messages on the LCD screen to make sure the data transfer is complete before
removing the USB device. If you remove the external USB device while operating the product, the
data on the external USB device may be lost or corrupted.
Note: Epson cannot guarantee the compatibility of your device. Make sure the files on the device
are compatible with the product.
Parent topic: Starting a Scan Using the Product Control Panel
Related tasks
Scanning Using Presets
Related topics
Loading Originals
To Next Page
Loading...
Need help?
General