229
Service name Protocol type Local/Remote port
number
Controls these operations
SNMP UDP 161/Any port Acquiring and configuring MIB from
applications such as Epson Device
Admin and the scanner driver
WSD TCP Any port/5357 Controlling WSD
WS-Discovery UDP 3702/Any port Searching for a product from WSD
Network Scan TCP 1865/Any port Forwarding scan data from
Document Capture Pro
Network Push Scan TCP Any port/2968 Acquiring job information on push
scanning from Document Capture
Pro
Network Push Scan
Discovery
UDP 2968/Any port Searching for a computer during
push scanning from Document
Capture Pro
HTTP (Local) TCP 80/Any port Forwarding Web Config and WSD
data to a HTTP or HTTPS server
HTTPS (Local) TCP 443/Any port
HTTP (Remote) TCP Any port/80 Firmware update and root certificate
update on a HTTP or HTTPS client
HTTPS (Remote) TCP Any port/443
Parent topic: Configuring IPsec/IP Filtering
IPsec/IP Filtering Configuration Examples
You can configure IPsec and IP filtering in a variety of ways, as shown in the examples here.
Receiving IPsec Packets Only
Use this example only for configuring a default policy.
• IPsec/IP Filtering: Enable
• Access Control: IPsec
• Authentication Method: Pre-Shared Key
• Pre-Shared Key: Enter a key up to 127 characters long
To Next Page
Loading...
