208
Related tasks
Accessing the Web Config Utility
Setting Up a WSD Port (Windows 7)
Scanning Using WSD - Windows
Configuring Product Settings
Follow the instructions in these sections to configure your product's control panel settings using the Web
Config software.
Checking Status Information
Configuring Email Notification
Managing the Network Connection
Updating Firmware Using Web Config
Parent topic: Administering Your Product
Checking Status Information
You can check information about the scanner using Web Config.
Note: Depending on the features of your product, not all of the options below may be available. Some
options are not available unless you are logged in to Web Config.
1. Access Web Config and log in using the administrator name and password.
2. Select the Status tab and choose one of the following options:
• Select Product Status to view product information.
• Select Network Status to view network information such as the IP address and network
connection status.
• Select Usage Status to view information about the number of scans and historical information
about the product.
• Select Hardware Status to view information about the product functions.
• Select Panel Snapshot to view a image of the current LCD screen.
Parent topic: Configuring Product Settings
To Next Page
Loading...
Need help?
General