211
Exporting Settings Using Web Config
Importing Settings Using Web Config
Parent topic: Administering Your Product
Exporting Settings Using Web Config
You can export your product's settings and optionally encrypt the settings file with a password.
1. Access Web Config and select the Device Management tab.
2. Under Export and Import Setting Value, select Export.
3. Select the settings you want to export.
Note: If you select a parent category, the child categories are also selected. By default, items that
are unique on the network, such as IP address, cannot be selected. If you want to export these
items, select Enable to select the individual settings of device. It is recommended that you
export only unique items when replacing a product on the network, otherwise you may encounter
conflicts on the network.
4. Enter and confirm an encryption password, if desired.
Note: You will need the password to import the file. Leave this blank if you do not want to encrypt the
file.
5. Click Export and save the file.
Parent topic: Importing and Exporting Product Settings
Related tasks
Accessing the Web Config Utility
Changing the Administrator Password in Web Config
Importing Settings Using Web Config
You can import the product settings file that was previously exported. If encryption was used when the
settings were exported, obtain the necessary password before you import.
Note: When importing values that include individual information such as a scanner name or IP address,
make sure the same IP address does not exist on the same network.
1. Access Web Config and select the Device Management tab.
To Next Page
Loading...
Need help?
General