91
Note: Do not load plastic cards vertically.
6. Adjust the edge guides to fit the edges of the original so that there are no gaps. Otherwise, the
original may skew.
7. Select the card type and turn off the Detect Double Feed setting on the Main Settings tab in Epson
Scan 2.
Note: If you do not disable the Detect Double Feed setting and a double feed error occurs, remove
the plastic or laminated card from the input tray and reload it.
Plastic and Laminated Card Specifications
Parent topic: Loading Originals
Related references
Scanner Positions
Related topics
Scanning
Plastic and Laminated Card Specifications
You can load original plastic and laminated cards that meet these specifications in your scanner.
To Next Page
Loading...
Need help?
General