135
9. Make sure that an icon appears for your product's name on the network.
When you use WSD, select your product name to scan over the network.
Parent topic: Starting a Scan Using the Product Control Panel
Scanning Using WSD - Windows
You can scan originals to a computer from the product control panel using WSD (Web Services for
Devices) for network scanning in Windows.
Note: To use this feature on Windows 7, you must first set up WSD on the computer. See Windows help
for instructions.
1. Make sure you installed the product software and connected the product to your computer or
network.
2. Place your original on the product for scanning.
3. Select the home icon, if necessary.
4. Select WSD.
5. Select a computer.
6. Select the start icon to start scanning.
7. When the WSD Scan Device screen is displayed on your computer, follow the on-screen
instructions.
Parent topic: Starting a Scan Using the Product Control Panel
Related tasks
Setting Up a WSD Port (Windows 7)
Scanning Using Presets
You can select a registered preset and use it to scan images.
1. Select the home icon, if necessary.
2. Do one of the following:
• Select the presets icon on the home screen, and select a registered preset from the list.
• Select the presets icon on the Scan menu, select Load Presets, and then select a registered
preset from the list.
• If you added the preset icon to the home screen, select the icon.
To Next Page
Loading...
Need help?
General