206
• If you have not set an administrator password before, enter a new password and confirm it in the
fields provided.
Note: Be sure to remember the administrator password you set. If you forget your password, you
will not be able to reset it and you will need to contact Epson.
5. Click OK.
Note: To restore the administrator password to the default value, select Restore Default Settings on
the Change Administrator Password screen.
Parent topic: Restricting Features Available for Users
Related tasks
Accessing the Web Config Utility
Setting a Password and Locking the Control Panel
Locking the Control Panel Using Web Config
You can lock the control panel to prevent users from changing system settings.
1. Access Web Config and select the Device Management tab.
2. Select Control Panel.
3. Select ON for the Panel Lock setting.
4. Click OK to save your setting.
Parent topic: Restricting Features Available for Users
Related tasks
Accessing the Web Config Utility
Disabling the External Interface
You can restrict the ability to connect from a computer using a USB connection or accessing a
connected USB device.
Note: Depending on your product features, not all of the options listed below may be available.
1. Access Web Config and select the Product Security tab.
2. Select External Interface.
To Next Page
Loading...
Need help?
General