87
• Thermal paper
• Ripped, curled, or wrinkled originals
• Originals with tears or fold lines
• Perforated originals
• Originals with labels or stickers
• Carbon-less paper
• Originals that have just been printed
Warning: Carbon-less paper contains chemical substances that may damage the rollers inside the
scanner. Make sure you clean the pickup roller and the separation rollers regularly. Scanning carbon-
less paper may reduce the service life of the rollers compared with scanning plain paper.
Note: When attempting to scan these types of originals, note the following:
• When scanning wrinkled originals, smooth out the wrinkles before loading if possible.
• Use the optional carrier sheet to scan originals that are delicate or wrinkled.
• If originals are incorrectly detected as double feeds, set the DFDS Function to Off on the control
panel, or select Off as the Detect Double Feed setting in Epson Scan 2.
• Labels or stickers must be firmly adhered to the scanned original with no exposed glue.
• When scanning an original with labels or stickers that look like they might come off easily, use a carrier
sheet (not included) and scan the original in the straight path position.
• Try to flatten curled originals as much as possible.
• For originals with folds, flatten the original so that the height of the fold is 0.2 inches (5 mm) or less
before loading.
Parent topic: Loading Multiple Sizes of Originals in the Input Tray
Loading Plastic and Laminated Cards in the Input Tray
You can load plastic and laminated cards that meet the card specifications in the input tray.
To Next Page
Loading...
Need help?
General