133
• Connection Mode: For FTP locations, select Passive Mode if there is a firewall between the
product and FTP server.
• Port Number: For FTP locations, enter the port number.
• Proxy Server Settings: Select whether or not to use a proxy server.
10. Click Apply.
After a moment, you see a message telling you that contact registration is complete.
11. Close your web browser.
Parent topic: Starting a Scan Using the Product Control Panel
Related tasks
Determining the Product's IP Address
Accessing the Web Config Utility
Scanning to a Network Folder or FTP Server
You can scan an image and save it to a network folder on your computer or on an FTP server using your
product's control panel. You can either enter the folder path directly on the product's control panel or
select a folder from the Contacts list.
Note: Before scanning, make sure you create a network folder or FTP server, and check that the
Date/Time and Time Difference settings are correct.
1. Place your original on the product for scanning.
2. Select the home icon, if necessary.
3. Select Network Folder/FTP.
4. On the Destination tab, do one of the following to enter a folder location:
• To select frequently used addresses, tap the icons displayed on the screen.
• To enter the folder path directly, select Keyboard > Communication Mode, and enter the folder
path in the Location (Required) field. Select other options, as necessary.
• To select a contact from the Contacts list, select Contacts, select a contact, and then select
Done. You can tap the icon to create a new contact, or search for a folder from the Contacts
list. Enter the search keyword into the box at the top of the screen.
5. Select the Scan Settings tab, and select the desired settings.
To Next Page
Loading...
Need help?
General