233
Setting Options Description
Dynamic Range Dynamic Range
Signal Status
HDR10 Setting
HLG Setting
Sets the video range to match
the input source setting
Dynamic Range: select Auto to
automatically identify the
dynamic range of the input signal
Signal Status: displays the
selected setting
HDR10 Setting: adjusts the PQ
curve of the dynamic range
HLG Setting: adjusts the HLG
curve of the dynamic range
Blanking Up, down, left, right Hides an area of the projected
image that you select using the
arrow buttons
Advanced Video Range Sets the video range to match
the setting of the device
connected to the HDMI, DVI-D,
or HDBaseT input ports
EDID Describes the projector's display
capabilities to devices connected
to the HDMI, HDBaseT, or DVI-D
input ports
Scale Various scale options When using multiple projectors to
project one image, adjusts the
scale of the image displayed by
each projector
Reset — Resets all the Signal menu
settings to their defaults
Parent topic: Adjusting the Menu Settings
Related references
Available Image Aspect Ratios
To Next Page
Loading...
