Epson EB-PU2113W User Manual

269
On/Standby
(power) light
Status
light
Laser
light
Temp light Status and solution
Off Flashing
blue
Orange Orange Lens problem or no lens is installed
• Remove and reattach the installed lens
• Attach a supported lens
• If the problem persists, unplug the
projector and contact Epson for help
Off Flashing
blue
Flashing
orange
Flashing orange Shutter error (EB-PU2213B/EB-
PU2216B/EB-PU2220B); turn off the
projector, unplug it, and contact Epson for
help
Flashing blue Varies Flashing
orange
Flashing orange Shutter warning (EB-PU2213B/EB-
PU2216B/EB-PU2220B); turn off the
projector, unplug it, and contact Epson for
help
— — Flashing
orange
quickly
Flashing orange
quickly
The batch setup file may be corrupt, or the
USB flash drive may not be connected
correctly.
Disconnect the USB flash drive, unplug
and then plug in the projector's power
cord, and then try again.
Flashing blue
quickly
Flashing
blue
quickly
Flashing
orange
quickly
Flashing orange
quickly
Writing the settings may have failed and
an error may have occurred in the
projector's firmware; turn off the projector,
unplug it, and contact Epson for help
Wireless LAN Status
Wireless LAN status Status and solution
Lit blue Wireless LAN is available.
Flashing blue quickly Connecting to a device.
Flashing blue slowly An error has occurred. Turn off the projector and
then on again.

Epson EB-PU2113W Specifications

General

Brand	Epson
Model	EB-PU2113W
Category	Projector
Language	English