Epson EB-S04 User Manual

111
Projector Network Settings - Network Menu
Setting Options Description Setting Options Description
Connection Mode Quick Select the type of wireless connection: SSID Display On Select whether to display the SSID on the
network standby screen.
Advanced Quick: lets you quickly connect to one Off
computer.
IP Address Display On Select whether to display the IP address
The projector becomes an easy access
on the network standby screen.
Off
point. Select the type of security and set
passphrase in the Security menu as
necessary to use EasyMP Network
Projection to connect in Quick
Network Menu - Security Menu
connection mode.
Advanced: lets you connect to multiple
Settings on the Security menu let you select the type of security and security
computers over a wireless network access
settings that match the network you are connecting the projector to.
point. The connection is established in
s Network > Network Configuration > Security
infrastructure mode.
Channel 1ch In Quick connection mode, selects the
frequency band (channel) used by the
6ch
wireless LAN.
11ch
SSID Up to 32 Sets the SSID (network name) of the
alphanumeric wireless LAN system the projector is
characters connecting to.
Search Access Point To Search View Search for available wireless network
access points in Advanced connection
mode. Depending on the access point
settings, they may not be displayed in the
list. You must set security separately.
IP Settings DHCP DHCP: set to On if your network assigns
addresses automatically; set to Off to
IP Address
manually enter the network's IP
Subnet Mask
Address, Subnet Mask, and Gateway
Gateway Address
Address using 0 to 255 for each address
field.
Setting Options Description
Do not use these addresses: 0.0.0.0,
Security Open Selects the type of security used on the
127.x.x.x or 224.0.0.0 through
wireless network.
WPA2-PSK
255.255.255.255 (where x is a number
When setting security, follow the
WPA/WPA2-PSK
from 0 to 255) for IP Address and
instructions from the administrator of
Gateway Address and 0.0.0.0 and
the network system you want to connect
255.255.255.255 for Subnet Mask.
to.

Epson EB-S04 Specifications

General

Native aspect ratio	-
Projection distance	1.77 - 2.4 m
Projection technology	3LCD
Contrast ratio (typical)	15000:1
Projection distance (wide)	0.88 - 10.44 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	- 30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
RMS rated power	1 W
Number of built-in speakers	1
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.26 W
Power consumption (typical)	277 W
Power consumption (economy mode)	207 W
Ethernet LAN (RJ-45) ports	0
Cables included	AC, VGA
Remote control type	IR
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Noise level	37 dB
Country of origin	Philippines
Noise level (economic mode)	28 dB
USB connector type	USB Type-A, USB Type-B
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Pallet width	800 mm
Pallet height	1190 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g
Package depth	360 mm
Package width	350 mm
Package height	160 mm
Package weight	3829 g