Epson EB-S04 User Manual

146
Solving Network Problems
projector's network Mail menu or in the network software.
Check the solutions in these sections if you have problems using the projector
• Set the Standby Mode setting to Communication On in the projector's
on a network.
ECO menu so the network software can monitor the projector in standby
mode.
gg Related Links
• Make sure your electrical outlet or power source is functioning correctly.
• "Solutions When You Cannot Access the Projector Through the Web" p.146
• "Solutions When Network Alert E-Mails are not Received" p.146
gg Related Links
• "Solutions When the Image Contains Static During Network Projection"
• "Network Menu - Mail Menu" p.112
p.146
Solutions When the Image Contains Static During
Solutions When You Cannot Access the Projector
Network Projection
Through the Web
If the projected image contains static during network projection, try the
If you are unable to access the projector through a Web browser, make sure
following solutions:
you are using the correct ID and password.
• Check for any obstacles between the access point, the computer, the mobile
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
device, and the projector, and change their positions to improve
• For the password, enter the password set in the projector's network Basic
communication.
menu. The default password is admin.
• Make sure that the access point, the computer, the mobile device and the
• Make sure you have access to the network the projector is on.
projector are not too far apart. Move them closer together and try to
connect again.
The user ID and password are case sensitive.
• If the wireless connection is slow or your projected image contains noise,
a
check for interference from other equipment, such as a Bluetooth device or
microwave. Move the interfering device farther away or expand your
wireless bandwidth.
gg Related Links
• "Network Menu - Basic Menu" p.109
• Reduce the number of connected devices if the connection speed declines.
Solutions When Network Alert E-Mails are not
Received
If you do not receive an e-mail alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly. (If an error shut down the projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the

Epson EB-S04 Specifications

General

Native aspect ratio	-
Projection distance	1.77 - 2.4 m
Projection technology	3LCD
Contrast ratio (typical)	15000:1
Projection distance (wide)	0.88 - 10.44 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	- 30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
RMS rated power	1 W
Number of built-in speakers	1
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.26 W
Power consumption (typical)	277 W
Power consumption (economy mode)	207 W
Ethernet LAN (RJ-45) ports	0
Cables included	AC, VGA
Remote control type	IR
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Noise level	37 dB
Country of origin	Philippines
Noise level (economic mode)	28 dB
USB connector type	USB Type-A, USB Type-B
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Pallet width	800 mm
Pallet height	1190 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g
Package depth	360 mm
Package width	350 mm
Package height	160 mm
Package weight	3829 g