Epson EB-S04 User Manual

117
Projector Information Display - Info Menu
Information item Description Event ID Cause and solution
code
Video Signal Displays the video signal format of the current input
source. 0484 Communication with computer was disconnected. Restart the
network software.
Refresh Rate Displays the refresh rate of the current input source.
0483 The network software quit unexpectedly. Check the network
Sync Info Displays information that may be needed by a service
communication status, then turn the projector off and then on again.
technician. 04FE
Status Displays information about projector problems that 0479 A projector system error has occurred. Turn the projector off and
may be needed by a service technician. then on again.
04FF
Serial Number Displays the projector's serial number.
0891 Cannot find an access point with the same SSID. Set your computer,
Event ID Displays the Event ID number corresponding to a access point, and projector to the same SSID.
specific projector problem; see the list of Event ID
0892 The WPA/WPA2 authentication type does not match. Make sure the
codes.
wireless network security settings are correct.
0893 The TKIP/AES encryption type does not match. Make sure the
gg Related Links
wireless network security settings are correct.
• "Event ID Code List" p.117
0894 Communication with an unauthorized access point was
disconnected. Contact your network administrator.
Event ID Code List
0898 Failed to acquire DHCP. Make sure the DHCP server is operating
correctly. If you are not using DHCP, set the DHCP setting to Off in
If the Event ID option on the Info menu displays a code number, check this
the projector's Network menu.
list of Event ID codes for the solution to the projector problem associated
s Network > Wireless LAN > IP Settings > DHCP
with the code.
0899 Other communication errors.
If you cannot resolve the problem, contact your network administrator or
Epson for technical support.
Event ID Cause and solution
code
0432 The network software did not start. Turn the projector off and then
on again.
0435
0434 Unstable network communication. Check the network
communication status, wait a few moments, and try connecting to
0481
the network again.
0482
0485
0433 Cannot display the transferred images. Restart the network software.

Epson EB-S04 Specifications

General

Native aspect ratio	-
Projection distance	1.77 - 2.4 m
Projection technology	3LCD
Contrast ratio (typical)	15000:1
Projection distance (wide)	0.88 - 10.44 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	- 30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
RMS rated power	1 W
Number of built-in speakers	1
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.26 W
Power consumption (typical)	277 W
Power consumption (economy mode)	207 W
Ethernet LAN (RJ-45) ports	0
Cables included	AC, VGA
Remote control type	IR
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Noise level	37 dB
Country of origin	Philippines
Noise level (economic mode)	28 dB
USB connector type	USB Type-A, USB Type-B
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Pallet width	800 mm
Pallet height	1190 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g
Package depth	360 mm
Package width	350 mm
Package height	160 mm
Package weight	3829 g