Epson EB-S04 User Manual

89
Using Quick Wireless Connection (Windows Only)
your computer.
You can use the Quick Wireless Connection USB Key to quickly connect the
In Windows Vista, if the AutoPlay window is displayed, select
projector to a Windows computer wirelessly and project your presentation.
Run LaunchQWRD.exe, then select Allow.
a
The Quick Wireless Connection USB Key is not included with your
projector.
a
g
Follow the on-screen instructions to install the Quick Wireless
Connection driver.
a
Make sure the wireless LAN module is installed or built into your
If the Windows Firewall message is displayed, click Yes to disable
projector.
the firewall.
a
b
Turn on the projector.
After a few minutes, your computer image is displayed by the projector.
If it does not appear, press the [LAN] button on your projector's
c
Press the [LAN] button on the remote control.
remote control or restart your computer.
The LAN standby screen is displayed. Verify that an SSID and IP
h
Run your presentation.
address are displayed.
i
When you have finished projecting wirelessly, select the Safely Remove
d
Do one of the following to connect the Quick Wireless Connection
Hardware option in the Windows taskbar, and then remove the Quick
USB Key.
Wireless Connection USB Key from your computer.
• Remove the wireless LAN module from the projector and insert the
Quick Wireless Connection USB Key into the same port used for the
You may need to restart your computer to reactivate your
wireless LAN module (EB-W31/EB-X36/EB-X31/EB-S31/EB-
wireless LAN connection.
a
U04/EB-W04/EB-X04/EB-S04/EB-U130/EB-W130/EB-X130/EB-
S130/EB-X350/EB-X300/EB-S300).
• Connect the Quick Wireless Connection USB Key to the projector's
USB-A port (EB-U32/EB-W32).
You see a projected message that the network information update is
complete.
e
Remove the Quick Wireless Connection USB Key.
If your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector.
f
Connect the Quick Wireless Connection USB Key to a USB port on

Epson EB-S04 Specifications

General

Native aspect ratio	-
Projection distance	1.77 - 2.4 m
Projection technology	3LCD
Contrast ratio (typical)	15000:1
Projection distance (wide)	0.88 - 10.44 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	- 30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
RMS rated power	1 W
Number of built-in speakers	1
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.26 W
Power consumption (typical)	277 W
Power consumption (economy mode)	207 W
Ethernet LAN (RJ-45) ports	0
Cables included	AC, VGA
Remote control type	IR
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Noise level	37 dB
Country of origin	Philippines
Noise level (economic mode)	28 dB
USB connector type	USB Type-A, USB Type-B
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Pallet width	800 mm
Pallet height	1190 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g
Package depth	360 mm
Package width	350 mm
Package height	160 mm
Package weight	3829 g